36mm Galvanized Steel Tile Backer Board Washers For Wooden Floors
And Stud Walls
Description Of 36mm Tile Backer Board Washers
36mm Tile Backer Board Washers are used to secure tile backer
boards, cement board,
XPS insulation boards, and other insulations foam to wooden floors
or stud walls.
| material | thickness | diameter | center hole |
| galvanized steel | 0.6mm | 36mm | 5mm |
1. 36mm Tile Backer Board Washers are countersunk, allowing the screw head to pull into the board with the outer rim of the washers remaining flush with
the board surface.
2. 36mm Tile Backer Board Washers are suitable for tile backer
boards, wooden floors, stud walls, as the washers help maintain the flat board surface
ready for the secure application of subsequent layers such as tile adhesives and plaster.
3. 36mm Tile Backer Board Washers have a perforated surface, which provides maximum board surface exposure. This allows standard adhesives and plasters to adhere to the board surface, minimizing the risk of surface
delamination or damage.
4. 36mm Tile Backer Board Washers are stainless steel 304 or galvanized steel material to protect them from corrosion and minimize any chance of degradation over time.
5. 36mm Tile Backer Board Washers are easy to fix & secure. |
Detailed Image Of The 36mm Galvanized Steel Tile Backer Board
Washers
 |
Application Of The 36mm Tile Backer Board Washers
1. When using the 36mm tile backer board washers to fix tile backer
boards to walls and floors, it is recommended to use 15 washers per 1200 x 600mm board. 2. This is only a guide and specifically it's depended on the type,
thickness, sub surface and what is to be put onto the board. 3. It is the installers responsibility to use the correct number of
washers to hold the tile backer board in place. |
 |  |
Related Products Of 36mm Galvanized Steel Tile Backer Boards
 | Item: 36mm Tile Backer Board Washers Material: Stainless Steel (galvanized steel also available) Size: 36mm Center Hole: 5mm Thickness: 0.6mm |
 | Item: 35mm Tile Backer Board Washers Material: Galvanized steel (stainless steel also available) Size: 35mm Center Hole: 5mm Thickness: 0.7mm |
 | Item: 4-Claw Tile Backer Board Washer Material: Galvanized steel (stainless steel also available) Size: 32mm Center Hole: 5mm Thickness: 0.6mm |
Package Of The 36mm Galvanized Steel Tile Backer Board Washers
1. 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as your requirement 2. paper carton 3. wood pallet |
 |
FAQ Of XIANGYI Metal Products Co.,Ltd.
1. Are you a manufacture or a trader?
We are a manufacture, located in Hebei province, China.
2. Do you support product customization?
Yes, the material, the surface finish, the size, all could be
customized.
3. Do you support package customization?
Yes, the package could be customized according to your need.
4. Can i get samples?
Yes, samples for quality confirm are supported.
5. Can you accept small orders?
Yes, for common size, we could accept small orders.
